Chiptuning Audi S4
Up to 30% more power for your Audi S4
Our catalogue lists 2 generations and 3 engines for the Audi S4 (2004 → 2015). For 2 turbo engines, the options are the GAN GT and GAN GTL tuning boxes: the GAN GT adds +57 to +57 hp (GAN GT from 459 EUR, GAN GTL from 279 EUR). For 1 naturally aspirated engine, the options are the GAN GA and GAN GA+: the GAN GA+ adds +28 to +28 hp (GAN GA+ from 219 EUR).
Which Audi S4 do you have?
Start with the model year and chassis code. Then pick your engine by the power output shown in your vehicle documents.
Audi S4 remap: what the GAN box does and doesn’t do
More power and torque without rewriting the ECU or replacing any parts. Unlike a flash remap, the tuning box leaves the ECU software alone and only adjusts the engine sensor signals.
- Bluetoothchange modes from your phone
- 18 mapsfine-tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +57 hpwith the GAN GT on turbocharged engines
Across the Audi S4 range: +57 to +57 hp with the GAN GT or GAN GTL.
- +28 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Audi S4 engines pick up +28 to +28 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Feel the difference or get your money back, excluding delivery costs.
Audi S4 chip tuning: engines and generations
Audi S4 remap: two generations, two kinds of engine
The S4 badge covers two very different engines, and the generation decides what a tuning box can do, so an Audi S4 remap begins there. In Britain it is simply the S4, as a Saloon or an Avant (the B7 also as a Cabriolet), and the B8 is known as the supercharged 3.0 TFSI S4. The B7, built from 2004 to 2009, has a 4.2 V8 with no turbocharger: 344 hp, 410 Nm and the engine code BBK. The B8, built from 2008 to 2015, has a supercharged 3.0 TFSI V6 with 333 hp and 440 Nm. On paper the newer engine gives away 11 hp to the V8.
The B7 V8 takes the GAN GA+ and the B8 takes the GAN GT, so the change of generation alters both the box and the gain. The catalogue lifts the B7 from 344 hp and 410 Nm to 372 hp and 443 Nm, a gain of 28 hp. The B8 rises from 333 hp and 440 Nm to 390 hp and 515 Nm, a gain of 57 hp. They are catalogue gains stated for each engine type, not a measurement taken on your own car.
The B8 before and after its facelift
Built from November 2008 to June 2015, the B8 (Typ 8K) came as a saloon (8K2) or an Avant (8K5), and there was no coupé or cabriolet. One engine served the whole generation, with the codes CAKA and CCBA, and CREC from 2014. Early B8 cars are known for water-pump and thermostat failures, and at higher mileage the 3.0 TFSI collects carbon on its intake valves, so have both checked before you fit a box.
With the facelift of autumn 2011 the seven-speed S tronic became the sole gearbox. S tronic symptoms such as delayed or jerky shifts and clunks are worth checking on a B8 before you add torque.
B7 chassis codes
Typ 8E, the A4 platform, underlies the B7: 8EC is the saloon, 8ED the Avant and 8HE the cabriolet. It was shown at the Paris motor show in October 2004, and the saloon and Avant stayed in production until February 2009. Every car has quattro with a six-speed manual or a six-speed Tiptronic, and the cabriolet followed at the start of 2006.
Audi S4 remapping: questions
Why does the supercharged S4 B8 3.0 TFSI take the GAN GT?
The 3.0 TFSI is supercharged, which makes it a forced-induction engine, and the GAN GT is rated at up to 30% more power. The catalogue puts the S4 B8 at +57 hp on this engine.
What gain is realistic on the naturally aspirated S4 B7 V8?
The GAN GA+ line, which suits naturally aspirated engines like the B7 V8, is rated at up to 12% more power. The catalogue shows +28 hp and +33 Nm for the B7 V8.
Does the S4 B8.5 facelift of 2011 change anything for the box?
Power stayed at 333 hp after the facelift; just the gearbox changed, to a seven-speed S tronic. Before and after the facelift the catalogue gives the same engine figures, 333 hp and 440 Nm.
Audi S4 Stage 1 remap or GAN tuning box: which leaves the software alone?
An ECU remap replaces the factory software. The GAN module leaves it alone and only adjusts the signals the ECU gets from the sensors. The factory software, its checksums and the flash counter are not touched, and the factory protections stay active. Fitting uses the existing connectors, and taking the module off takes about a minute.
Do I need to tell my insurer about a GAN tuning box?
Yes. In the UK a power increase counts as a modification, and insurers expect to be told about it before you drive with the box fitted. Each insurer handles it differently, so check with yours first and quote the before-and-after output from the table above.
Is a tuning module the same as a Stage 1 remap?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.