Chiptuning BMW 4 Series
Up to 30% more power for your BMW 4 Series
Our catalogue lists 3 generations and 29 engines for the BMW 4 Series (2013 →). For 29 turbo engines, the options are the GAN GT and GAN GTL tuning boxes: the GAN GT adds +27 to +77 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR).
Which BMW 4 Series do you have?
Start with the model year and chassis code. Then pick your engine by the power output shown in your vehicle documents.
BMW 4 Series remap: what the GAN box does and doesn’t do
More power and torque without rewriting the ECU or replacing any parts. Unlike a flash remap, the tuning box leaves the ECU software alone and only adjusts the engine sensor signals.
- Bluetoothchange modes from your phone
- 18 mapsfine-tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +77 hpwith the GAN GT on turbocharged engines
Across the BMW 4 Series range: +27 to +77 hp with the GAN GT or GAN GTL.
- +138 Nmfor diesels with the GAN GT
Diesels gain mostly torque: +84 to +138 Nm – you feel it when overtaking and towing.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Feel the difference or get your money back, excluding delivery costs.
BMW 4 Series chip tuning: engines and generations
BMW 420d remap: the 4 Series badge says little
Until March 2015 the F32 BMW 420d had the N47 with 184 hp and 380 Nm; after that it has the B47 with 190 hp and 400 Nm. The G22 420d stays at 190 hp and 400 Nm and adds a 48-volt mild hybrid system. The 430d changed more: the F32 uses the N57 at 258 hp and 560 Nm, the G22 the B57 at 286 hp. When you pick a 4 Series tuning box, the build year and body code tell you more than the badge.
Coupé, Convertible, Gran Coupé: the codes
The coupé is the F32, the convertible (with a folding metal roof) the F33, and the five-door Gran Coupé the F36. The second generation began with the G22 coupé in 2020, followed in 2021 by the G23 convertible and the G26 Gran Coupé. In Britain the range is badged 4 Series Coupé, Convertible and Gran Coupé, with SE, Sport and M Sport as trims and the M4 as a separate M model.
For the M4, go to the BMW M4 page. The F36 uses the same engines as the F32, with changes on the same dates, in March 2015 and March 2016. Only the Gran Coupé was sold as a 418d.
Petrol engines and the Power Kit
In March 2016 the 428i gave way to the 430i (B48, 252 hp), and the 435i with 306 hp to the 440i (B58, 326 hp). BMW's own M Performance Power Kit, a software upgrade for the F32 435i, 420d and 430d, was a factory option and not a series engine. Fit the GAN GT to an F32 420d and 190 hp and 400 Nm become 225 hp and 505 Nm. Those are the stated gains for this engine type, not a dyno result from your own car.
BMW 4 Series remapping: questions
BMW 430d and 435d remap or tuning box, and what is stage 1?
Stage 1 normally means new software is written into the control unit. A tuning box writes nothing to the control unit. Your manufacturer's warranty is preserved, because the ECU software is never changed and the module can be taken off at any time.
Does the N47 timing chain affect the 418d, 420d and 425d?
Diesels built before 2015 and 2016 carry the N47, and its chain is prone to wear. Chain failures are recorded on BMW diesels up to 2015; the B47 that arrived in March 2015 is a different engine.
BMW 440i tuning box: how does it differ from the 435i?
The 440i's 3.0-litre B58 makes 326 hp and 450 Nm, and the car took over from the 435i in March 2016. The earlier 435i has the N55, a different six-cylinder. The G22 M440i also uses the B58, listed at 500 Nm.
Do I need to tell my insurer about a GAN tuning box?
Yes, declare it. British insurers treat extra power as a modification, so the safe course is to tell them before you fit the box. How they treat it varies from one insurer to another, so ask before you fit the box; the standard and tuned figures you will be asked for are in the table on this page.
Is a tuning module the same as a Stage 1 remap?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.