Chiptuning Mercedes-Benz ML
Up to 30% more power for your Mercedes-Benz ML
Our catalogue lists 3 generations and 34 engines for the Mercedes-Benz ML (2005 → 2015). For 20 turbo engines, the options are the GAN GT and GAN GTL tuning boxes: the GAN GT adds +33 to +100 hp (GAN GT from 399 EUR, GAN GTL from 249 EUR). For 14 naturally aspirated engines, the options are the GAN GA and GAN GA+: the GAN GA+ adds +18 to +41 hp (GAN GA+ from 189 EUR).
Which Mercedes-Benz ML do you have?
Start with the model year and chassis code. Then pick your engine by the power output shown in your vehicle documents.
Mercedes-Benz ML remap: what the GAN box does and doesn’t do
More power and torque without rewriting the ECU or replacing any parts. Unlike a flash remap, the tuning box leaves the ECU software alone and only adjusts the engine sensor signals.
- Bluetoothchange modes from your phone
- 18 mapsfine-tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +100 hpwith the GAN GT on turbocharged engines
Across the Mercedes-Benz ML range: +33 to +100 hp with the GAN GT or GAN GTL.
- +41 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Mercedes-Benz ML engines pick up +18 to +41 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Feel the difference or get your money back, excluding delivery costs.
Mercedes-Benz ML chip tuning: engines and generations
Mercedes ML remap: a heavy load starts with the diesel
With a caravan on the drawbar or a full load aboard, an ML needs torque at low revs, and the diesels supply it. That is why a Mercedes ML remap or tuning box starts with the diesels. The W164 diesels are the ML 280 CDI with 190 hp and 440 Nm, the ML 300 CDI with 204 hp and 500 Nm, the ML 320 CDI with 224 hp and 510 Nm and the ML 350 CDI with 231 hp and 540 Nm. On the W166 you find the ML 250 BlueTEC at 204 hp and 500 Nm and the ML 350 BlueTEC at 258 hp and 620 Nm. British listings show these two as the ML 250 BlueTEC 4MATIC and ML 350 BlueTEC 4MATIC.
The GAN GT covers these diesels and the twin-turbo petrol ML 400 and ML 500 of the W166. The petrol ML 350 and ML 500 of the W164 take the GAN GA+. In Britain the M-Class is usually just called the ML, identified by its W163, W164 or W166 chassis code. It has been called the GLE since autumn 2015, but older cars are still listed as ML, so ML chip tuning covers the W163, W164 and W166.
Mercedes-Benz ML remapping: questions
ML 320 CDI: how much more power does a tuning box give?
In the catalogue the W164 ML 320 CDI goes from 224 hp and 510 Nm to 269 hp and 617 Nm with the GAN GT. Treat these as stated gains for the engine type, not a dyno reading of your car.
Which box suits the W163 ML 270 CDI and ML 400 CDI?
The ML 270 CDI is a five-cylinder OM 612 diesel with 163 hp and 370 Nm, while the V8 ML 400 CDI makes 250 hp and 560 Nm. The GAN GT suits both.
Should I declare the GAN box to my insurer?
Yes. In the UK a power increase counts as a modification, and insurers expect to be told about it before you drive with the box fitted. Each insurer handles it differently, so check with yours first and quote the before-and-after output from the table above.
Is a tuning module the same as a Stage 1 remap?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.