Chiptuning Infiniti M
Up to 12% more power for your Infiniti M
Our catalogue lists 5 generations and 11 engines for the M. For 11 naturally aspirated engines, the options are the GAN GA and GAN GA+: the GAN GA+ adds +22 to +33 hp (GAN GA+ from 199 EUR).
Which M do you have?
Start with the model year and chassis code. Then pick your engine by the power output shown in your vehicle documents.
Infiniti M remap: what the GAN box does and doesn’t do
More power and torque without rewriting the ECU or replacing any parts. Your manufacturer’s warranty is preserved: the ECU software is never changed, and the box can be removed at any time.
- Bluetoothchange modes from your phone
- 18 mapsfine-tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +33 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Infiniti M engines pick up +22 to +33 hp.
- up to +30%more power
GAN GT: up to 30%, GAN GTL: up to 25%, GAN GA+: up to 12%.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Feel the difference or get your money back, excluding delivery costs.
Infiniti M chip tuning: engines and generations
Infiniti M35h remap: 306 hp or 364 hp
Ask about an Infiniti M35h and you get two power figures: 306 hp from the 3.5 V6 petrol engine, the VQ35HR, and 364 hp for the hybrid system as a whole. The electric motor contributes 68 hp, and the system torque is 546 Nm. The catalogue lists the M35h at 306 hp and 350 Nm, which is the petrol engine alone, and that is the figure a tuning box works from. The 364 hp often quoted for the M35h is the combined system output, so when you compare tuning options, go by the petrol engine's 306 hp.
The Y51 in Britain: the M35h and the M37
The M35h is a Y51, the generation Infiniti sold in Europe from 2010 and renamed Q70 in the summer of 2013. It made its debut in Geneva in 2010, and German dealers had it by July 2010. Every European Y51 is rear-wheel drive with a seven-speed automatic. The older Y50, the M35 and M45, was built for the United States and Asia and was never officially sold in Europe. Infiniti's British dealers sold the M37 and the M30d from 2010 and the M35h from 2011.
The petrol M37 uses the 3.7 V6 VQ37VHR, which Europe rates at 320 hp and 360 Nm. It was the main petrol engine at the 2010 launch and stayed in production until 2018. The M35h arrived in April 2011. The diesels sold in Europe, the M30d with 238 hp and 550 Nm and, from 2015, the 2.2d with 170 hp and 400 Nm, are listed on the Infiniti Q70 page. The GAN GA+ covers both the M37 and the M35h.
Check the engine code before you order a box
Match by engine code: the VQ35HR in the M35h and the VQ37VHR in the M37. The diesels are unrelated engines: the M30d has the V9X and the 2.2d the Mercedes OM651. The M30d, a 3.0 V6 diesel built from 2010 to 2014, was a Europe-only engine.
Infiniti M remapping: questions
What does an Infiniti M35h remap with the GAN box add?
With the box the 306 hp engine reaches 330 hp and 378 Nm. The GAN GA+ is rated at up to 12% more power; that is the stated gain for this engine type, not a dyno reading of your car.
Is it an Infiniti M or a Q70?
It is one and the same car, renamed Q70 in the summer of 2013. Go by engine and output, whichever badge is on the boot lid.
My M37 is rated at 320 hp: which row do I pick?
The catalogue shows this VQ37VHR at 328 hp and at 333 hp, whereas your car is rated at 320 hp and 360 Nm. Both rows are the same engine, so take the one closest to the output in your papers.
How does a tuning box differ from an ECU remap on an Infiniti M?
A flash remap replaces the factory software in the engine control unit; the GAN box leaves it as it is. Your manufacturer's warranty is preserved, because the ECU software is never changed and the box can be taken off at any time.
Do I need to tell my insurer about a GAN tuning box?
Tell them. A tuning box raises the output, and in Britain that is a declarable modification like any other performance change. Policies differ, so a quick call to your insurer before fitting is the safe route; the figures they will ask for are the stock and GAN outputs listed here.
Is a tuning module the same as a Stage 1 remap?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.