Chiptuning Toyota Mark
Up to 12% more power for your Toyota Mark
Our catalogue lists 2 generations and 9 engines for the Toyota Mark. For 9 engines, the options are the GAN GA and GAN GA+: the GAN GA+ adds +19 to +26 hp (GAN GA+ from 189 EUR).
Which Toyota Mark do you have?
Start with the model year and chassis code. Then pick your engine by the power output shown in your vehicle documents.
Toyota Mark remap: what the GAN box does and doesn’t do
More power and torque without rewriting the ECU or replacing any parts. Your manufacturer’s warranty is preserved: the ECU software is never changed, and the box can be removed at any time.
- Bluetoothchange modes from your phone
- 18 mapsfine-tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +26 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Toyota Mark engines pick up +19 to +26 hp.
- up to +30%more power
GAN GT: up to 30%, GAN GTL: up to 25%, GAN GA+: up to 12%.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Feel the difference or get your money back, excluding delivery costs.
Toyota Mark chip tuning: engines and generations
Toyota Mark X remap: Mark II, Mark X and the Cressida
A Mark II Tourer V remap starts with the 1JZ-GTE, a turbocharged 2.5-litre making 280 hp and 378 Nm. Here Mark II means the Japanese X90, X100 and X110 generations, 1992 to 2004, none of which reached Europe. A tuning box for the Mark X follows the same logic. Toyota never offered the Mark X in Europe: built since 2004, it is a rear-wheel-drive V6 saloon, so any tuning begins with the Japanese engine range. The Cressida is an older story: it was the export name of the early Mark II.
The sporty Mark II of the X100 and X110 is the Tourer V. Toyota GB never listed the Mark II or Mark X, so those in Britain are Japanese cars imported and registered one by one. Imports are identified by Japanese chassis codes such as JZX100 and GRX130 and by trims such as Grande, Tourer S and Tourer V on the Mark II, or 250G and 350S on the Mark X. The Tourer V has the turbocharged 1JZ-GTE; its 280 hp is a Japanese-market rating, not a British one.
The engines, by code
The year decides a Mark X 2.5 remap: the 4GR-FSE gives 215 hp in the X120 but 203 hp in the X130. A 3.0-litre 3GR-FSE gives 256 hp, while a supercharged 320 hp variant was built between 2006 and 2009. The 3.5-litre 2GR-FSE in the X130 makes about 318 hp. Mark II rows in the catalogue add a 2.0-litre 1G-FE (160 hp) and a 2.5-litre 1JZ-GE (200 hp). Across the saloons that gives 203, 212, 215 and 256 hp for the Mark X, and 160, 200 and 280 hp for the Mark II.
The Mark X ZiO minivan, not the saloon, owns the 2.4-litre 163 hp and 3.5-litre 280 hp versions. Direct injection is common to all three V6 engines: 4GR-FSE, 3GR-FSE and 2GR-FSE. Badges like 250G, 350S and Tourer V name the version, not the engine. The Mark II's naturally aspirated 2.0 1G-FE makes 160 hp and 200 Nm, which sets it well apart from the turbocharged Tourer V.
Toyota Mark remapping: questions
How much does the GAN GA+ lift the Mark II Tourer V 1JZ-GTE?
Standard figures in the catalogue are 280 hp and 378 Nm, rising to 302 hp and 408 Nm with the GAN GA+. This engine works with the GAN GA+ and the GAN GA alike, both rated at up to 12% more power. Those are stated gains for the engine type, not a dyno reading of your car.
Does a 250G or 350S badge tell me the engine?
No, they name the version, not the engine code. On the saloon, 4GR-FSE is the 2.5, 3GR-FSE the 3.0 and 2GR-FSE the 3.5, so find the engine code before you choose a version.
Which GAN device fits the Mark X 3.0?
The 3.0-litre 3GR-FSE, 256 hp and 314 Nm, reaches 276 hp and 339 Nm with the GAN GA+.
Was the Cressida simply a Mark II?
Cressida was the export name of the Mark II generations X30 to X60, sold in Europe from December 1976. European Cressidas had petrol engines of 99 to 105 hp or a 66 hp diesel, none of which are in the catalogue.
Do I need to tell my insurer about a GAN tuning box?
Tell them. A tuning box raises the output, and in Britain that is a declarable modification like any other performance change. Policies differ, so a quick call to your insurer before fitting is the safe route; the figures they will ask for are the stock and GAN outputs listed here.
Is a tuning module the same as a Stage 1 remap?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.