Chiptuning Subaru Forester
Up to 30% more power for your Subaru Forester
Our catalogue lists 6 generations and 26 engines for the Subaru Forester (2000 →). For 4 turbo engines, the options are the GAN GT and GAN GTL tuning boxes: the GAN GT adds +37 to +69 hp (GAN GT from 399 EUR, GAN GTL from 249 EUR). For 22 engines, the options are the GAN GA and GAN GA+: the GAN GA+ adds +15 to +29 hp (GAN GA+ from 189 EUR).
Which Subaru Forester do you have?
Start with the model year and chassis code. Then pick your engine by the power output shown in your vehicle documents.
Subaru Forester remap: what the GAN box does and doesn’t do
More power and torque without rewriting the ECU or replacing any parts. Unlike a flash remap, the tuning box leaves the ECU software alone and only adjusts the engine sensor signals.
- Bluetoothchange modes from your phone
- 18 mapsfine-tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +69 hpwith the GAN GT on turbocharged engines
Across the Subaru Forester range: +37 to +69 hp with the GAN GT or GAN GTL.
- +29 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Subaru Forester engines pick up +15 to +29 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Feel the difference or get your money back, excluding delivery costs.
Subaru Forester chip tuning: engines and generations
Subaru Forester remap: the letter decides the engine
For a tuning box one letter makes all the difference. On the Forester IV (SJ) the 2.0 X is naturally aspirated and rated at 150 hp, while the 2.0 XT is a turbo with 240 hp and 350 Nm. UK listings tend to identify a Forester by its generation code and badge, so you will see SG, SH, SJ and SK next to badges such as 2.0X, 2.0XT, 2.0D X, 2.0i XE and 2.0i e-Boxer. The GAN GA+ adds 18 hp and 24 Nm to the 2.0 X, and the GAN GT adds 41 hp and 60 Nm to the 2.0 XT.
The Forester III (SH) reached Europe with two engines: the 2.0X at 150 hp and the 2.0D turbodiesel at 147 hp and 350 Nm. A 2.0D that mostly does short journeys can run into DPF clogging and regeneration problems, so check the filter before adding power. The Forester III 2.0X takes the GAN GA+ too, with the same 18 hp and 24 Nm.
Subaru Forester remapping: questions
Forester XT remap: how much does the 2.0 XT gain with the GAN GT?
The catalogue moves the Forester IV 2.0 XT from 241 hp and 350 Nm to 282 hp and 410 Nm with the GAN GT. A turbo engine of this kind is rated at up to 30% more power with the GAN GT. Both figures are stated gains for the engine type, not a dyno reading of your car.
Which gains more on a Forester, the 2.0 X or the 2.0 XT?
The naturally aspirated 2.0 X is rated at up to 12% more power with the GAN GA+, the turbo 2.0 XT at up to 30% with the GAN GT. The Forester V (SK) sold in Europe is a mild hybrid, the 2.0 e-Boxer, rated at 150 hp and 194 Nm. Subaru UK currently lists the Forester as a self-charging hybrid. There is no catalogue row for the 2.0 e-Boxer.
Should I declare the GAN box to my insurer?
Yes. In the UK a power increase counts as a modification, and insurers expect to be told about it before you drive with the box fitted. Each insurer handles it differently, so check with yours first and quote the before-and-after output from the table above.
Is a tuning module the same as a Stage 1 remap?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.