Chiptuning Subaru Legacy
Up to 30% more power for your Subaru Legacy
Our catalogue lists 5 generations and 28 engines for the Subaru Legacy (2003 →). For 2 turbo engines, the options are the GAN GT and GAN GTL tuning boxes: the GAN GT adds +41 to +70 hp (GAN GT from 399 EUR, GAN GTL from 249 EUR). For 26 engines, the options are the GAN GA and GAN GA+: the GAN GA+ adds +15 to +29 hp (GAN GA+ from 189 EUR).
Which Subaru Legacy do you have?
Start with the model year and chassis code. Then pick your engine by the power output shown in your vehicle documents.
Subaru Legacy remap: what the GAN box does and doesn’t do
More power and torque without rewriting the ECU or replacing any parts. Unlike a flash remap, the tuning box leaves the ECU software alone and only adjusts the engine sensor signals.
- Bluetoothchange modes from your phone
- 18 mapsfine-tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +70 hpwith the GAN GT on turbocharged engines
Across the Subaru Legacy range: +41 to +70 hp with the GAN GT or GAN GTL.
- +29 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Subaru Legacy engines pick up +15 to +29 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Feel the difference or get your money back, excluding delivery costs.
Subaru Legacy chip tuning: engines and generations
Subaru Legacy remap: the fourth generation comes first
A 2004 Legacy is a fourth-generation car (BL or BP), and that is normally where a tuning box search begins. In Britain these cars were sold in trims such as S and SE, with the 3.0R spec.B in the 3.0-litre range. Engines at launch were the 2.0 at 137 hp, the 2.5 at 165 hp and the 3.0R at 245 hp; the 2.0R followed at 165 hp and, after the 2008 update, at 150 hp. That 2008 update added a 2.5 at 173 hp as well, while the 2.0D at 150 hp appeared in March 2008.
The Legacy V offers a 2.0 petrol and the 2.0D at 150 hp each, plus the 2.5 at 167 hp and later 173 hp. In Britain the Legacy V was sold as an estate only, with the 2.0i or the 2.0D at 150 hp each or the 2.5i at 167 hp, and all three have a row in the Legacy V table. Subaru UK stopped selling the Legacy after the fifth generation, so a sixth- or seventh-generation car in Britain is a non-UK or grey import. The naturally aspirated petrols of these generations take the GAN GA+, and the 2.0D takes it too.
Subaru Legacy remapping: questions
Legacy IV 2.5 165 hp remap: what does the GAN GA+ add?
The catalogue takes this engine from 165 hp and 226 Nm as standard to 185 hp and 253 Nm with the GAN GA+. Read them as stated figures for this engine type, not as a dyno result from your car.
What about the Legacy GT and the 2.5 turbo?
The Legacy V table includes a 2.5 GT at 265 hp, yet that turbo car was sold in Switzerland only. The 2.0T versions belong to other markets too.
Do I need to tell my insurer about a GAN tuning box?
Yes, declare it. British insurers treat extra power as a modification, so the safe course is to tell them before you fit the box. How they treat it varies from one insurer to another, so ask before you fit the box; the standard and tuned figures you will be asked for are in the table on this page.
Is a tuning module the same as a Stage 1 remap?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.