Chiptuning Suzuki Alto
Up to 12% more power for your Suzuki Alto
Our catalogue lists 4 generations and 14 engines for the Suzuki Alto (2001 →). For 14 naturally aspirated engines, the options are the GAN GA and GAN GA+: the GAN GA+ adds +5 to +8 hp (GAN GA+ from 189 EUR).
Which Suzuki Alto do you have?
Start with the model year and chassis code. Then pick your engine by the power output shown in your vehicle documents.
Suzuki Alto remap: what the GAN box does and doesn’t do
More power and torque without rewriting the ECU or replacing any parts. Your manufacturer’s warranty is preserved: the ECU software is never changed, and the box can be removed at any time.
- Bluetoothchange modes from your phone
- 18 mapsfine-tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +8 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Suzuki Alto engines pick up +5 to +8 hp.
- up to +30%more power
GAN GT: up to 30%, GAN GTL: up to 25%, GAN GA+: up to 12%.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Feel the difference or get your money back, excluding delivery costs.
Suzuki Alto chip tuning: engines and generations
Suzuki Alto remap: a small engine with little in reserve
A tuning box for the Alto starts from the 1.0 K10B, the engine of the Alto sold in Europe from April 2009 to 2014. The car is the Indian-built Maruti A-Star, twin of the Nissan Pixo, and its three-cylinder 1.0-litre engine makes 68 hp and 90 Nm. Peak torque of 90 Nm arrives at 3,400 rpm on the 1.0. The same applies to the A-Star, which is the same car, so an Alto 1.0 remap covers it too.
It was offered with a five-speed manual or an automatic, in three trim levels. In Britain the Alto was sold from 2009 to 2014 in trims such as SZ, SZ3 and SZ4, all on the same 1.0 petrol engine, so the trim says nothing about the box. UK sources identify no turbocharged Alto, so the GAN GA+ is the box for this naturally aspirated engine.
Which Alto do you have?
The Alto sold in Europe is not the Japanese kei car; the 0.66-litre Alto never left Japan. Starting in 2002, the European Alto was the Indian-built Maruti Alto, based on the HA12, with a 1.1-litre F10D engine. The F10D is a four-cylinder with 16 valves. Torque is 85 Nm at 3,200 rpm. Three different cars share the Suzuki Alto name: the Indian Maruti Alto, the Japanese kei car and the European 1.0 with 68 hp.
For Europe two are confirmed, the 1.1 of 2002 to 2009 and the 1.0 of 2009 to 2014, and nothing else matters for a European car. The 2009 to 2014 car is the Indian-built A-Star; the eighth Alto, the HA36 of 2014, remained a Japan-only car. The Alto VI, the Japanese HA24 of 2004 to 2009, was never a separate generation in Europe: there the 2002 to 2009 car stayed on the HA12. The Celerio took over from the Alto in Europe in 2014. So pick by engine: the 1.1 covers 2002 to 2009, the 1.0 covers 2009 to 2014.
Suzuki Alto remapping: questions
What does the GAN GA+ add to an Alto 1.0?
Stock the engine gives 68 hp and 90 Nm; with the GAN GA+ it gives 76 hp and 101 Nm. The GAN GA+ is rated at up to 12% more power and, with an economical driving style, up to 15% lower fuel consumption. Those are stated figures for the engine type, not a dyno run on your own car.
Is there a box for the Alto 1.1 built from 2002 to 2009?
Yes: the catalogue has the 1.1-litre F10D of the Maruti-built car, at 62 hp. That car reached European buyers in 2002.
Is the Japanese 0.66 kei Alto the car sold in Europe?
No. Europe never received the Japanese kei car's 0.66-litre engine, and the 0.7i rows in the catalogue belong to that car and not to the European Alto.
Should I declare the GAN box to my insurer?
Yes, declare it. British insurers treat extra power as a modification, so the safe course is to tell them before you fit the box. How they treat it varies from one insurer to another, so ask before you fit the box; the standard and tuned figures you will be asked for are in the table on this page.
Is a tuning module the same as a Stage 1 remap?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.