Chiptuning Peugeot 208
Up to 30% more power for your Peugeot 208
Our catalogue lists 1 generation and 22 engines for the 208 (2012 → 2019). For 18 turbo engines, the options are the GAN GT and GAN GTL tuning boxes: the GAN GT adds +20 to +39 hp (GAN GT from 329 EUR, GAN GTL from 219 EUR). For 4 naturally aspirated engines, the options are the GAN GA and GAN GA+: the GAN GA+ adds +8 to +14 hp (GAN GA+ from 189 EUR).
Which 208 do you have?
Start with the model year and chassis code. Then pick your engine by the power output shown in your vehicle documents.
Peugeot 208 remap: what the GAN box does and doesn’t do
More power and torque without rewriting the ECU or replacing any parts. Unlike a flash remap, the tuning box leaves the ECU software alone and only adjusts the engine sensor signals.
- Bluetoothchange modes from your phone
- 18 mapsfine-tuning for your engine

- 15 minutesfitted to the factory connectors
- IP67water and dust protection
- +39 hpwith the GAN GT on turbocharged engines
Across the Peugeot 208 range: +20 to +39 hp with the GAN GT or GAN GTL.
- +14 hpwith the GAN GA+ on naturally aspirated engines
Naturally aspirated Peugeot 208 engines pick up +8 to +14 hp.
- GAN APPpower control via smartphone
SPORT, DYNAMIC, ECO and STOCK modes in the GAN app.
- 50 daystest drive
Feel the difference or get your money back, excluding delivery costs.
Peugeot 208 chip tuning: engines and generations
Peugeot 208 remap: the 1.6 HDi diesels, revised in 2015
The 1.6 diesel in the 208 is sold in a lower and a higher output, and both were revised early in 2015. British buyers call this first-generation car the 208 Mk1; the car launched in 2019 is the Mk2, a different generation. The 92 hp, 230 Nm e-HDi became the 99 hp, 254 Nm BlueHDi in March 2015, and since March 2018 that engine has made 102 hp and 250 Nm. On a British car the 99 hp version is badged BlueHDi 100, so match your engine by its hp figure in the table rather than by the badge. The 114 hp, 270 Nm e-HDi was replaced by the 120 hp, 300 Nm BlueHDi, a Euro 6 engine that uses AdBlue.
Euro 6 BlueHDi cars have an SCR system, so the car's year matters when we match a tuning box to your 208. The smaller 1.4 HDi, with 68 hp and 160 Nm, was built from April 2012 until March 2015. Every one of these diesels takes the GAN GT. UK used-car guides recommend a diesel 208 only to drivers who cover lots of motorway miles, which is where extra torque is most noticeable.
Petrol 208s: naturally aspirated VTi, turbo PureTech and THP
The 68 hp petrol began as the 1.0 VTi (2012 to 2016) and carried on as the 1.2 PureTech from 2016 to 2019. A 1.2 with 82 hp and 118 Nm was built from 2012 to 2019. The 1.6 VTi gives 120 hp and 160 Nm and went out of production in May 2015. VTi engines are naturally aspirated, so they take the GAN GA+. The turbocharged one is the 1.2 PureTech 110, with 205 Nm, built from January 2015 to March 2019.
In the 1.6 THP, output was 156 hp in the early years and 165 hp in 2015. Among the hot hatches, the GTi has 200 hp and 275 Nm, and the GTi by Peugeot Sport has 208 hp from October 2014. All the turbo petrols, THP and PureTech alike, take the GAN GT. Sales of the 208 began in Europe in April 2012, with the facelift following in June 2015.
Peugeot 208 remapping: questions
How much extra power does a 208 1.6 e-HDi 115 get from the GAN GT?
On the 114 hp diesel the GAN GT takes output to 148 hp and torque to 349 Nm. Up to 30% more power is the rating for the GAN GT as a range; the figures above are stated for the engine type and are not a dyno measurement of your own car.
Which GAN box suits the 208 GTi 200 and the GTi by Peugeot Sport?
Both the 200 hp GTi and the 208 hp GTi by Peugeot Sport take the GAN GT.
1.2 PureTech: GAN GT or GAN GA+?
The turbocharged 1.2 PureTech 110 takes the GAN GT; the 82 hp naturally aspirated engine takes the GAN GA+. The 1.2 PureTech has a timing belt that runs in oil, and it can break up even when the car is serviced on schedule, sending debris into the oil passages. A degrading wet belt can first show up as an oil-pressure warning, so treat it as a service matter and not a tuning one. A tuning box cannot make up for a worn part, so get the belt inspected before you fit it.
BlueHDi chip tuning or remap: does the factory software change?
Unlike a flash remap, the GAN box does not rewrite your ECU software: it sits between the engine sensors and the ECU and adjusts their signals, so the factory software, checksums and flash counter stay as they are. The ECU keeps all of its factory protections.
Should I declare the GAN box to my insurer?
Tell them. A tuning box raises the output, and in Britain that is a declarable modification like any other performance change. Policies differ, so a quick call to your insurer before fitting is the safe route; the figures they will ask for are the stock and GAN outputs listed here.
Is a tuning module the same as a Stage 1 remap?
Not quite. Stage 1 usually means an ECU remap without replacing any parts. The tuning module also works without replacing parts, but it does not change the ECU software: it adjusts the sensor signals, comes off in about a minute, and the OFF button in the app restores the factory settings.